|
TRAIL CAMERA
ACCESSORIES |
|
Click Image to Enlarge |
Sony P32 / P41
Shutter Assembly
Custom shutter
assembly used with camera control wires.
Pricing is for single shutter assembly. |
Available Soon at
BFOutdoors |
|
Click Image to Enlarge |
3 Wire Micro Servo
Connector
Polarity
sensitive / Camera to BG2 Complete Board connector.
|
TEMP.
OUT OF STOCK |
|
Click Image to Enlarge |
LODIFF Flash Enhancer
Fresnel Tech LODIFF pattern polycarbonate
flash enhancer / Use for trail camera flash hole cover. |
Available at
BFOutdoors |
|
Click Image to Enlarge |
3M PT 1100 Sealing Tape
5" by 5" square / Superior
sealing tape to mount fresnel lens, flash enhancer, and glass shutter hole
covers.
How to Install 3M PT 1100 Sealing Tape by Buckboy
|
Available at
BFOutdoors
|
|
Click Image to Enlarge |
Small Flash Bleed Gasket
1" O.D. by .50"
I.D. neoprene gasket. Used to prevent flash bleed within the trail camera
enclosure by sealing the area around the camera's lens to the lens opening
of the trail camera enclosure.
|
Available Soon at
BFOutdoors
|
|
Click Image to Enlarge |
Large Flash Bleed Gasket
1.5" O.D. by
.75" I.D. neoprene gasket. Used to prevent flash bleed within the trail
camera enclosure by sealing the area around the camera's lens to the lens
opening of the trail camera enclosure.
|
Available Soon at
BFOutdoors
|
|
Click Image to Enlarge |
9V Battery Snap
9 volt battery
snap connector w/ 6" leads.
Recommended battery power for BG2 Complete Board used as a trail camera
controller. |
Available Soon at
BFOutdoors
|
|
Click Image to Enlarge |
9V Battery Holder
9 volt battery holder w/ 6" leads.
Recommended battery power for BG2 Complete Board used as a trail camera
controller. |
Available Soon at
BFOutdoors
|
|
Click Image to Enlarge |
6V Battery Holder
(AA)
6 volt AA
battery holder w/ 6" leads.
Recommended battery power for BG2 Complete Board used as a LANC video game
camera controller. |
Available Soon at
BFOutdoors
|
|
NO IMAGE
Click Image to Enlarge |
2.5mm LANC Cable
Used with LANC camcorder video
game camera system to connect BG2 Complete Board to LANC jack on camcorder. |
Available Soon at
BFOutdoors
|
|
Click Image to Enlarge |
BG1 DIP Switch Label
Interior label
for field reference of BG1 Complete Board DIP switch settings. |
$.25 Each |
|
NO IMAGE
Click Image to Enlarge |
BG2
Mounting Kit
Kit
includes: (3) hex aluminum standoffs w/ (6) black stainless steel
machine screws. |
$2.00 Each |
|
Click Image to Enlarge |
BG2 DIP Switch Label
Interior label
for field reference of BG2 Complete Board DIP Switch settings |
$.25 Each |
|
Click Image to Enlarge |
BG2 LANC DIP Switch Label
Interior label
for field reference of BG2 Complete Board LANC DIP Switch settings. |
$.25 Each |
