Jump to content

Full Fan

Advanced Members
  • Content Count

    681
  • Joined

  • Last visited

Everything posted by Full Fan

  1. Folks, I use to build homebrews years ago. Followed this site religiously. Over the years I have gotten out of homebrews and switched to manufactured units. I have a room full of parts, cams, cases, etc. Is anyone interested in anything? If so, I will attempt to go through everything and see what I have. Most of my builds were P41's, P32's, S600's in Pelican 1020's & 1040's. Most of the boards are SnapShotSnipers. All cases are drilled out with hand painted 3d camo/liquid nails. I don't mind parting some of this stuff out if anyone needs anything. Some of the cams have been robbed of the flash. Some of them work fine. Some of them don't. Some have had a battery door removed. Things of that nature. If you need any parts for anything this will be a good opp for them. If you need a predrilled case and have a P41 sitting idle that needs a case/board I will dig thru my pile. I also have screws for the cases, stand offs for the boards, different option's of chips for the SSS boards, etc. I basically have a room full of stuff that's been sitting idle and I simply no longer use. I'm sure someone that's into homebrews, as I use to be, could sit down end up with several perfectly working units. I even have memory cards. I basically have everything you need for homebrew stuff. I will supply pics if need be. I will sell the entire lot pretty cheap if the right person has any interest. I will continue to check back here and see if there is any interest.
  2. SOLD (4) Pelican 1040 3d camo case ready for S40 or S600. Pixcontroller boards. Additional chips. They may work. If interested I will test them. Will sell cheap. Make offer.
  3. (2) Pelican 1040 3d camo case ready for BG1/P41. Board doesn’t work in either unit. Case only. Will sell cheap. Make offer.
  4. Few more items left. 1020 Pelican case for Pentax unit. Ignore the boards. Will be case only. Will sell cheap. Make offer.
  5. Folks....everything is basically gone. Appreciate each of you looking and enjoyed helping some of you out. Only thing left basically are the micro SD cards.
  6. Example of what my 3d camo looks like. Forgot to post that.
  7. GONE Also have additional chips for Field Marshall (Time Lapse). Simple to swap out. If you need anything let me know.
  8. All are gone.... I also have a few SnapShotSniper boards, which are separate from what you see above. Some may need a little TLC or is missing a small piece. If you are handy at troubleshooting you could possibly get some of these working in a pinch.....real cheap. Other misc boards as well. I don't think the BG1's are working. Just didn't know if someone needed parts.
  9. ALL ARE GONE A few of the cases I have rigged and ready for cams. I removed the cams so I could post them individually. I will try to take pics of the 3d camo side tonight. I have about 20 more cases not pictured as well. I have just about every build for a P32, P41, S600, Pentax you could want. All pelican cases. 1020s and 1040's. Make me an offer. It cant hurt
  10. All Gone... Misc parts.... I will post pics of pre punched cases later. I have about 30+/-. 3d camo cases. Most with SnapShotSniper boards and rigged and ready for P41's, P32's, S600's, etc.
  11. ALL ARE GONE 9 volt holders, misc servos, Round Glass, Toggles, etc.
  12. Sony P52. Never hacked. Should be working perfectly. Will test if interested.
  13. THESE ARE GONE S40's. Some of these cams may work perfectly. Some are parts. If interested in any of these for parts or possibly working units let me know.
  14. THESE ARE SOLD Pentax. Some of these cams may work perfectly. Some are parts. If interested in any of these for parts or possibly working units let me know.
  15. SOLD S600's. Some of these cams may work perfectly. Some are parts. If interested in any of these for parts or possibly working units let me know.
  16. ALL ARE GONE P41's. Some of these cams may work perfectly. Some are parts. If interested in any of these for parts or possibly working units let me know.
  17. ALL ARE GONE P32's. Some of these cams may work perfectly. Some are parts. If interested in any of these for parts or possibly working units let me know.
  18. SOLD More items will be listed below. Make me an offer. (3) chargers and the batts will go with it. The white "x" represents a bay that doesn't work. The charger discharges as well as charges independently in each cell. Great for slow charging and not overheating. I plugged each one in and tested it.
  19. Speed and others....Yes that's fine shoot me a PM. I will sell as lots and part stuff out as along as it's not too micro managed. I don't particular want to sell one memory stick and ship it lol.....but I will work with anyone interested. Just run it by me. I have a lot of stuff that could really help some folks out if they spent a little time on it. I'm not trying to make a killing off anyone on this stuff. When I was building sometimes all it took was finding a broken P41 for $15 and robbing it of the flash to get one of my $300 dollar units up and running for recon. Yall Keep checking back as I will continue to add items as I clean up. Feel free to ask for anything priced
  20. These are still available...... Going to start with memory cards. I have a lot more stuff than I anticipated. If you have any questions or cant read the sizes let me know.
  21. Folks....sorry for the delay. I will try to get a list together shortly along with pics. There is a long list of stuff so bare with me and I will post soon.
  22. Will check for you later this eve John. The majority of my builds were P41's/P32's, but I feel certain I still have some S600 setups. Will certainly do you right.
×