IroquoisArcher

On the SS2 I just twisted the lens and common wires together and inserted in the common connection. Isn't a fast hack anymore but is useable. I was using it with a reg. hack S600 but the S600 wasn't doing the hummingbird pics. quite the way I wanted so put the fast hacked S40 in doing this and works good. Figured you knew this but....

You were gone? Really just posting this as can't find one I just posted. Just trying to see if it works, Ralph hasn't been able to get on, his says Domain is down. Oh but welcome back or whatever!

Okay boys and girls. This years Camfest is going to be June 23-25 at Johns (hydiseka) camp. It is on Eagleton Rd. Outside of Blanchard. Contact John for directions.

another batch

Been doing alot of bird pics. from back yard. These are from Sun., 1,270 from 7 am. to 2 pm.

Will keep you in prayer. Same as others have said about the procedure, mother had it and was up and walking (with some help) next day and with walker day after.

Too clean. lol Nice job.

I'm never able to get a P32 not in a set up to even turn on with alkalines so agree with the rechargables/lithiums

Prayers for comfort sent too.

Don't eat too much everyone.

My bad Bob. Knew too much oil would be bad but knew Randall was from the south so might not have as much problem. Just meant to use a drop on a q-tip and work the lens doors and then a dry q-tip to remove any of it. Knew this wasn't the best way.

Not sure on the W230 but on the W30/50 I've popped the silver front "cap" off and then there was a cover removed by 2 screws and the lens doors could be lifted out. (think this was way it was after removing the front cap, wolvenkinde had posted about this a couple years ago on DIY) Know have a picture of the removed stuff somewhere but can't find it. Well maybe he did it on a Panasonic but I did basically the same on the W30 and W50. http://www.diytrailcams.com/post/panasonic...?pid=1277261190 Did you try using fine oil maybe on a q-tip and wiping along the door edges to see if can work it a few times and lubricate/remove any crud from them?

Try looking here. http://www.diytrailcams.com/?forum=236392 You'll have to scroll thru the hacks to find the right one. A lot of the slave hacks are here. The 2000 does have like 4-5 different versions so make sure to match it first. Believe it is the 31057-13 board. http://www.diytrailcams.com/post/pivot-hea...?pid=1278797626 or http://www.hagshouse.com/forums/index.php?showtopic=32105 . The large yellow 3.3 ufd capacitor isn't needed. No idea on the control board.

PM me your address Ben. Have one here I put blurry on, may just have been a swap out I did on one of mine so may or may not work for you. Night seems to be only time it was blurry if I remember right.

Nope, never...that's my story and I'm sticking to it!