Jump to content

WI_Bowhunter

Advanced Members
  • Content Count

    208
  • Joined

  • Last visited

Everything posted by WI_Bowhunter

  1. Everything has been SOLD. Thanks for looking!
  2. The last of my homebrews.... A few years back I sold a bunch of homebrews, but kept these 10 back. I thought I'd use them, however I rarely did (The black flash bug bit HARD). In fact, after I lost my house and most of my possessions in a house fire in July 2016, I assumed that they were gone. It was just recently that I discovered this box of cams tucked away on a shelf in my garage... All of my other homebrewing equipment (tools, parts, batteries, supplies, ect...) were destroyed in the fire, and I don't see myself replacing the majority of it. I was phasing myself out of the homebrews as it was... That said, I don't have the tools or parts required to work on these cams should they need attention in the future. So, I've decided to sell them. What follows is a list of everything that was in the box when I pulled it from my garage: 3 Sony S-600 complete units. S600 cameras (Hacked by FiremanJim) wired for externals with a 5 wire servo. Shutter lens modification done as well. Plano 1425 cases with HPWA lens. All dipped in Ultimate Camo SS2 control board with 3.6V onboard battery. Batteries are dated 2015. Would recommend replacement... Stainless Steel pipe thru design for security with python lock (not included) 2 "D cell" battery holders for external power. Metal 40 gram rechargeable desiccant pack for moisture control 7 Sony P-41 complete units. P41 cameras (Hacked by myself) wired for externals with a 5 wire servo. Shutter lens disabled. Wires routed out the tripod hole. No holes drilled in the camera cases. Plano 1425 cases with HPWA lens. All dipped in Ultimate Camo SS2 control board with 3.6V onboard battery. Batteries are dated 2015. Would recommend replacement... Stainless Steel pipe thru design for security with python lock (not included) 2 "D cell" battery holders for external power. Metal 40 gram rechargeable desiccant pack for moisture control These 10 cameras were all built together as one group. They are identical to one another. They are exceptionally clean and well made units. In the box there was also 1 Unhacked Sony P-41 Camera, as well as a bunch of Memory Sticks... From left to right and top to bottom in the picture (below) the memory sticks are as follows: 4 Sandisk 256MB MS Pro (3 orange and 1 blue) 1 Sony 256MB MS Pro (black) 3 Sony 1GB MS Pro (black) 2 Sandisk 1GB MS Pro (blue) 3 Sony 512MB MS Pro (black) 10 Sandisk Ultra II 512MB MS Pro 8 Memory Stick Pro Duo Adapters 4 Sony 2GB MS Pro Duo (black) 1 Sony 1GB MS Pro Duo (black) 10 Sandisk 2GB MS Pro Duo (blue) All of the cameras in these units power up. They all take pictures with the flash and record them to the memory stick. The control boards all powered up, and went through the walktest phase. They all sensed motion (LED indicated) when I waved my hand in front of them. After a minute or so I waved my hand again and every unit woke up the camera and fired a picture, just as they are supposed to. The cameras stayed on (trail mode) for about a minute then powered down. That is all the testing that I did with them. I did notice that a few of the red LED's on the control boards seemed weaker than others, which to me indicates a failing battery. The batteries were all replaced in early 2015. Some of these units were used in the fall of 2015 and others were not. In any case I'd recommend new batteries for all of them... While the limited testing I did shows that all units are working, I must sell these AS IS. I simply do not have the tools needed to fix them should something be wrong. Once the control board batteries are replaced, I strongly believe that all these units will work flawlessly, however I cannot guarantee anything. Please be aware of this when you buy them. For what I'm asking, I believe this is fair. $600 will get everything shipped TYD in the states. If you're in Canada we can discuss options... It seems that I can only add 1 photo per post. This photo shows the front of all 10 units. The S-600's are on top...
  3. I'd like to give preference to someone that might be wanting to take the whole lot. I realize that might be a bit unrealistic, but I'm not in a rush to get rid of them. If I can't get what I'm asking for out of them, I'll probably donate them to some neighborhood youths to play with... On the other hand, if someone wants to make me an offer on 2 or more individual cameras, I'm all ears...
  4. Here is a pic of the unhacked P41
  5. Here is a close up of one of the P-41 units. All 7 are identical..
  6. This is a close up of one of the S-600 units. All 3 are identical
  7. This pictures shows the inside of all 10 units. Again the S-600's are on top.
  8. WI_Bowhunter

    S600 Fast Hack/yeti Won't Shutter Pic

    Hey Guys, a little more background info on this particular camera... It is one of the units I just sold in the classifieds. I bought this s600 from a member here (with the fast hack already done) a few years back. After finishing the build I never had any problems with the camera and never had to open it up, so I can't say how the wiring was done. I can tell you that it does not have external power. I tested this one in my yard a few weeks back and it was working as normal before I listed it for sale. All of the other cameras arrived safely and in working condition, but this one seems to have an issue now. Perhaps a wire came loose or something like that during shipment... At any rate, I have exchanged several PM's with the OP and I have told him everything I know about the camera, which isn't a lot. It had been a few years since I used it, and really don't remember much about the fast hack s600's. (It was the only one I ever had) Any help or advice you guys can give to help get this camera working again will be greatly appreciated!! In the worst case scenario, I have already offered to buy the camera back from the OP if he is unable to get it working to his satisfaction... Thanks, Chad
  9. A while back I sold off a bunch of homebrews that I had bought from another member who was getting out of the hobby. Now, I've decided to sell off half of my remaining personal builds. As of today I have 20 homebrews, 10 of them will be for sale here. These were all built by myself, and have not really been used in 2 or 3 years. I went through them yesterday, and they all seem to be working fine. The cameras all take pictures with and without the flash. The boards all power on and trigger the cameras to take pictures. These are quality builds, that are very clean and have used the best of materials... In the first pic the cameras are in order from the left to the right. Top row is 1-5, bottom row is 6-10. This pic shows the inside of cameras 1-5. 1, 2, and 3 are on top. 4 and 5 on the bottom. This pic shows the inside of cameras 6-10. 6, 7, and 8 are on top. 9 and 10 on the bottom. This picture shows the squirrel chews on the HPWA lens of camera #10. UPDATE: THIS CAMERA HAS BEEN REDONE. I GAVE IT A NEW HPWA LENS AND A FRESH COAT OF PAINT. SEE PICTURE BELOW. #1 - SOLD #2 - s600, SSS LCD board with Activity Mode, Plano 1425 case with 3-D camo. Gray W/A fresnel lens, Stainless tube, hacked with a 3 wire servo. 40gram metal desiccant pack. #3 - s600, Yeti board (fast hack) with Rapid Pic Mode, Plano 1425 case w/3-D camo. Gray W/A fresnel lens, Stainless tube, hacked with a 2.5mm stero plug. 40gram metal desiccant pack. #4 - p41, Yeti board with Rapid Pic Mode, Plano 1425 case with 3-D camo. Gray W/A fresnel lens, Stainless tube, hacked with a 3 wire servo (camera has a hole in the top of it from a 2.5 mm stereo plug that was removed), 40gram desiccant pack. #5 - p41, Yeti board with Rapid Pic Mode, Plano 1425 with 3-D camo. Clear W/A fresnel lens, PVC tube, 3 wire servo, 40gram desiccant pack (not in picture, but is included). #6 - p41, Bigfoot board with Trail Mode, Plano 1425 with 3-D camo. HPWA fresnel lens, Stainless tube, 3 wire servo, 40gram desiccant pack. #7 - p41, Bigfoot board with Trail Mode, Plano 1425 with 3-D camo. HPWA fresnel lens, PVC tube, 3 wire servo, 40gram desiccant pack. #8 - p41, Bigfoot board with Trail Mode, Plano 1425 with a real bark camoflauge job. HPWA fresnel lens, Stainless tube, 3 wire servo, 40gram desiccant pack. #9 - p41, Bigfoot board with Trail Mode, Plano 1425 with 3-D camo. HPWA fresnel lens, PVC tube, 3 wire servo, 40gram desiccant pack. (A squirrel chewed some of 3-D camo off, but no damage was done to the case or the fresnel lens. Easy fix with a little paint.) CAMERA HAS BEEN REPAINTED, SEE PICTURE BELOW #10 - p41, Bigfoot board with Trail Mode, Plano 1425 with 3-D camo. HPWA fresnel lens, PVC tube, 3 wire servo, 40gram desiccant pack. (A squirrel chewed some of 3-D camo off, and even managed to poke a couple small holes in the fresnel lens. Camera still works, but is no longer watertight. Shouldn't be too hard to replace the HPWA lens.) I REPLACED THE HPWA WITH A NEW ONE AND GAVE IT A NEW COAT OF PAINT, SEE PICTURE BELOW As I said before, these are my personal builds, and I always took great pride in my ability to produce a quality unit. I no longer have the time or knowledge to offer a warranty on these units, however no one will be allowed to be unhappy with their purchase. If something is not as described please get a hold of me and we will work something out!! If that's not acceptable, please look elsewhere... Would take $1000 for the whole lot... Or $125 apiece. Offers accepted, especially on the damaged one(s). In a few days, I may cross post this to ArcheryTalk or other sites... PM or text (608-865-0804) if you have any questions...
  10. WI_Bowhunter

    More Cams For Sale....sold

    Thanks for the kind words Befus. I wish you the best of luck with the cam... The rest of these cameras are now sold and will be on there way to Illinois tomorrow! Thanks to everyone else for looking.
  11. WI_Bowhunter

    More Cams For Sale....sold

    Camera #1 has been sold. All others still available....
  12. WI_Bowhunter

    More Cams For Sale....sold

    Trigger speed on the s600/sss is variable due to selectable settings on the board. I have it set to 2 seconds right now and it triggered reliably during my testing. The yeti fast hack triggers at around 1.5 seconds. This is all pretty typical for the s600 camera. Battery life is totally dependent on the number of day/night pictures, and batteries used. I typically used lithium batteries in them and left them out for a month or two at a time. I do not use bait so picture count was never real high, likely 800 to 1000 pics on a set of batteries...
  13. WI_Bowhunter

    More Cams For Sale....sold

    That is correct.
  14. WI_Bowhunter

    More Cams For Sale....sold

    Anybody out there that can use these?? $65 each if you take all 10. $80 each for choice. Prices are TYD, with a python lock included!
  15. WI_Bowhunter

    More Cams For Sale....sold

    $75 each if you want them all.. $90 for choice. Might consider other offers as well. All come with a python lock (with keys).
  16. WI_Bowhunter

    More Cams For Sale....sold

    I was going through some extra parts and came across a new black HPWA lens, so I decided to switch out the one that had the squirrel chews on it. While I was at it, I added some paint to both of the cameras that had been chewed on. They are pictured below: #9 on the left, #10 on the right.
  17. WI_Bowhunter

    More Cams For Sale....sold

    $800 for all 10 cameras, or $100 for choice.... All come with a python lock... All in working condition, I just simply don't need them anymore... Text me for the quickest reply! Thanks, Chad
  18. WI_Bowhunter

    More Cams For Sale....sold

    Also forgot to include that each camera comes with a used MasterLock Python cable lock.
  19. WI_Bowhunter

    More Cams For Sale....sold

    Forgot to put this in the original post. These are all whiteflash cameras...
  20. Continuation of my getting out of the homebrew cameras sale....... This is the next batch of items up for sale. 8 complete p41 units with the original SSS board. They are in Pelican 1040 cases in varying camoflauge patterns. All are setup with a standard Lodif .65" fresnel lens as well as a flash enhancer. They all have 9 volt battery holders. The boards do have rapid pic programming, but do not have the field marshal option. Also the motion-kill switch has been removed. Cameras 6, 7, and 8 have a pipe thru for a python cable, the rest do not, however there is plenty of room to add one if you choose to. Each unit also includes a quick detach mounting bracket and the part that screws into the tree. All these units power on and take pictures as expected. Most of the internal batteries on the p41's are bad, so you must keep batteries installed in them in order to keep from having to redo the settings all the time. I did not build these but rather purchased them, a year ago, from another guy who was getting out of homebrews. I only used them a couple times each since I've had them. No issues.... I've described these units to the best of my knowledge, but since I didn't personally build them, I'm selling them AS-IS with no warranty. With that said, I'm very honest and easy to work with. If something isn't as described or you're not happy with your purchase I'll work with you to make things right. $SOLD. Next up is a couple partial builds, and a few cases. These came from the same place as the complete cams. I have a black 1020 case that has a small snorkel with glass installed setup for an s600 tight to the top of the case. This was going to be a special project of mine (no flash), but I never got around to finishing it. $SOLD I'm open to offers on multiple items within reason. I also have a bunch of parts and other supplies to go through and will add those to this post once I get things organized. In the meantime if you have a specific need, let me know as I may have something for you!!
  21. The 8 complete units and the black 1020 case with snorkel is all that is left.
×