Jump to content

Firemanjim

Hag's House VIP
  • Content Count

    1,371
  • Joined

  • Last visited

Everything posted by Firemanjim

  1. Firemanjim

    Error Codes..

    I can't read anything on the forum at all.....Every thread I click on says the error code....
  2. Would you sale just the memory sticks and cards? If yes than how much?
  3. Firemanjim

    Question for the "Board builders and Suppliers

    Just for the 'Record" I offered to send you a brand new board FREE!! I am sorry my computer got crashed in a lightning storm. The board is over 3 years old.....Just curious how long do you feel we should "warranty" these boards? Did I mention that I offered to send you a BRAND NEW BOARD FREE!! Glad you got that off your chest!
  4. Firemanjim

    Picaxe 14m Slave Controller

    The problem has to be in the interrupt portion of the code I sent you.....we will play with it some more .....don't give up on this yet...
  5. Firemanjim

    Questions Dxg 567v

    The 224 does not have a color filter on it. It is a ir lense....
  6. Firemanjim

    Questions Dxg 567v

    The bb224 is the lens I have found to be best with the 567 and the 125's. Bases are the same. I get the lenses at www.elecrronics123.com
  7. Firemanjim

    Been a long time coming

    Not sure if you done this or not.....but if you will put a 1M resistor to ground on one side of the resistor and put the other side of the resistor in line to the picaxe it will help "stabalize" the signal to the picaxe....
  8. Firemanjim

    Big Bertha

    There is your code Johnnie
  9. Firemanjim

    Big Bertha

    #REM PROGRAM FOR THE GEN2.0 VIDEO BOARD FOR JOHNNIE WILSON DIP 1 CONTROLS THE VIDEO LENGTH DURING THE DAY OFF = 1 1/2 MINUTES ON = 3 MINUTES DIP 2 CONTROLS THE VIDEO LENGTH AT NIGHT OFF = 1 1/2 MINUTES ON = 3 MINUTES DIPS 3 AND 4 CONTROLS THE SHUTTER DELAY FOR THE DXG125 The Array plugs in to Output 1 The Mic Preamp plugs into Output 2 #ENDREM SYMBOL CDSREAD = C.0 SYMBOL CDSPWR = C.1 SYMBOL PIRINPUT = PINC.2 SYMBOL SPOTLIGHT = C.3 SYMBOL SERIALIN = PINC.4 SYMBOL DIP4 = PINC.5 SYMBOL CAMPWR = C.6 SYMBOL LED = C.7 SYMBOL DIP3 = PINB.0 SYMBOL DIP2 = PINB.1 SYMBOL DIP1 = PINB.2 SYMBOL OUT4 = B.3 SYMBOL CAMSHT = B.4 SYMBOL OUT3 = B.5 SYMBOL MIC = B.6 SYMBOL OPTO2 = B.7 'List Outputs and make them low Low CDSPWR Low SPOTLIGHT Low CAMPWR Low LED Low OUT4 Low OPTO2 Low OUT3 Low MIC Low CAMSHT ' List Inputs Input C.2 'PIR INPUT Input C.4 'SERIAL IN FOR PROGRAMMING Input C.5 'DIP 4 INPUT Input B.0 'DIP 3 INPUT Input B.1 'DIP 2 INPUT Input B.2 'DIP 1 INPUT 'list Bit Variables Symbol DayStatus = bit0 Symbol SpotLightOn = bit1 'list Byte Variables Symbol LightLevel = b4 Symbol DaySetting = b5 Symbol NightSetting = b6 Symbol Counter = b7 'list Word Variables Symbol DayRecordTime = w7 Symbol NightRecordTime = w8 Symbol ShutterDelay = w9 Symbol WalkTestTimer = w10 Symbol CheckCDSTimer = w11 Disablebod 'Set default variable settings DayStatus = 1 DaySetting = 30 NightSetting = 20 WalkTestTimer = 0 CheckCDSTimer = 0 Nap 5 'let power settle so we can check the dip switch settings If Dip1 = 1 Then 'Dip 1 is Off so 1 1/2 minute video length DayRecordTime = 40 ElseIf Dip1 = 0 Then 'Dip 1 is On so 3 minute video length DayRecordTime = 78 EndIf Nap 5 'let power settle so we can check dip 2 If Dip2 = 1 Then 'Dip 2 is Off so 1 1/2 minute video length NightRecordTime = 40 ElseIf Dip2 = 0 Then 'Dip 2 is On so run in TrailMaster Mode NightRecordTime = 78 EndIf Nap 5 'let power settle so we can check dips 3 and 4 for Shutter Delay for the DXG125 If Dip3 = 1 and Dip4 = 1 Then ShutterDelay = 600 ElseIf Dip3 = 1 and Dip4 = 0 Then ShutterDelay = 900 ElseIf Dip3 = 0 and Dip4 = 1 Then ShutterDelay = 1200 ElseIf Dip3 = 0 and Dip4 = 0 Then ShutterDelay = 2000 EndIf Nap 5 'turn on the camera and test everything High LED Pause 1000 High SpotLight Pause 1000 High CamPwr Pause 1000 Low CamPwr Sleep 5 High CamPwr Pause 1000 Low CamPwr Pause 1000 Low SpotLight Pause 1000 Low LED Pause 2000 Nap 5 'let power settle so we can check the cds and see if it is daytime or night outside High CdsPwr ' apply power to CDS sensor Nap 5 ' allow power to settle Readadc CdsRead, LightLevel Low CdsPwr If LightLevel < NightSetting Then DayStatus = 0 Pause 1000 EndIf If LightLevel >= DaySetting Then DayStatus = 1 Pause 1000 EndIf CheckCDSTimer = 0 Nap 3 WalkTest: If PirInput = 1 then High LED Nap 6 'pause low power for 1.1 seconds Low LED Nap 8 'pause low power for 4 seconds WalkTestTimer = 0 EndIf If WalkTestTimer >= 210 then 'approx 30 seconds Let b8 = 10 For Counter = 1 to b8 High LED Pause 200 Low LED Pause 200 Next Counter Pause 1000 SetInt %00000100,%00000100 GoTo MainProgramLoop EndIf WalkTestTimer = WalkTestTimer + 1 Nap 3 GoTo WalkTest MainProgramLoop: CheckCDSTimer = CheckCDSTimer + 1 If CheckCDSTimer >= 2080 Then ' check time every 5 minutes High CdsPwr ' apply power to CDS sensor Nap 5 ' allow power to settle Readadc CdsRead, LightLevel Low CdsPwr If LightLevel >= DaySetting Then DayStatus = 1 CheckCDSTimer = 0 Pause 1000 Endif If LightLevel < NightSetting Then DayStatus = 0 CheckCDSTimer = 0 Pause 1000 EndIf EndIf Nap 3 GoTo MainProgramLoop Interrupt: High Mic 'turn on the mic preamp If DayStatus = 0 Then 'its dark outside so turn on the led array High SpotLight SpotLightOn = 1 EndIf High CamPwr 'turn on the camera Pause 1000 Low CamPwr Pause ShutterDelay High CamSht 'push the shutter to start recording video Pause 1300 Low CamSht If DayStatus = 1 Then 'get the length of video desired from dip switch settings Sleep DayRecordTime ElseIf DayStatus = 0 Then Sleep NightRecordTime EndIf High CamSht 'stop recording the video Pause 2000 Low CamSht If SpotLightOn = 1 Then 'turn the array off if it was on Low SpotLight SpotLightOn = 0 EndIf Low Mic 'turn off the mic preamp High CamPwr 'turn off the camera Pause 1000 Low CamPwr Nap 3 SetInt %00000100,%00000100 'reset the interrupt for the pir sensor Return
  10. Firemanjim

    Big Bertha

    Sure
  11. Firemanjim

    Big Bertha

    Yes a code can be written to do that.
  12. Firemanjim

    Problem with Samsung A402

    I have never, not once, seen a Samsung a402 or a 503 that would run on anything larger than a 2gb card....
  13. I have been running IR Samsung A503's for years now . They serve my purpose well. All IR converted. No exchangers except on one or two of the eighteen total. But ever since watching the Panasonic FP8 hack video Ralph done I am intrigued with this camera and want to know more about it. Does it do Black and white and will it hold the setting? I want to see some pics if anyone has any....Thanks in advance. I forsee some really good A503 units coming up FOR SALE very soon....
  14. Firemanjim

    Won't Record

    When I designed my video board I integrated the reed relay into the board with the diode. I always hated having to goop the relay and diode down under the board. Glad it worked for you...Over a 2 year period there is no telling how many DXG125 video builds I done for the Federal Drug Enforcement Adminastration .....Good Luck with your future projects,
  15. Firemanjim

    Won't Record

    Yes..That should solve your problem. That would be a 5v relay and requires much less power to energize the coil and activate the reed.
  16. Firemanjim

    Won't Record

    I noticed this year's ago when I was building a ton of dxg125 units. Look at the Reed relay and see if it is a 12v relay. I found some 5v Reed relays and started using them and it solved the problem.
  17. Firemanjim

    Best soldier iron

    You need one that you can adjust the temperature on.....
  18. Firemanjim

    Kwikee Quiver Male bracket

    http://www.bohning.com/products/quivers/replacement-parts/chameleon-stem-attachment/
  19. Firemanjim

    Kwikee Quiver Male bracket

    WWW.LancasterArchery.Com
  20. Firemanjim

    Safari PIR

    Ralph uses the omni directional pir on all his boards. So you can turn it horizontal or vertical.
  21. Firemanjim

    DXG 125 Focus

    Yes...They can be
  22. Firemanjim

    Happy Birthday Pdskal

    Happy Birthday Paul!!
  23. Firemanjim

    Wireless Remote Triggers

    Don't order the old Day/Night boards. I have a new Remote Slave Flash Control board that will save you a lot of battery life....
  24. Firemanjim

    Wireless Remote Triggers

    Here is a link for what you need to buy. Sometimes you can find them on Ebay but there is a ton of fakes so I quit buying them on Ebay. Just wasn't worth the 3 - 4$ in savings. These work out to 100 feet or so. Works on 433mhz. Good luck with your project. http://www.cowboystudio.com/product_p/npt-04.htm
×