Jump to content

Firemanjim

Hag's House VIP
  • Content Count

    1,388
  • Joined

  • Last visited

Everything posted by Firemanjim

  1. Firemanjim

    PIR

    Headlights should have nothing to do with a PIR detecting or not detecting. A PIR senses "Heat in Motion".....Not sure how a headlight could effect that.
  2. Firemanjim

    BF slavemaster

    The Red and black from the Slavemaster go to the battery that supplies the slave flash 6v. The green and orange go to the red and black from the slave flash board. The orange wire from the slavemaster is a "direct through" trace to the red wire. The on/off is controlled by the negative wire through a mosfet. But a direct answer to your question is your red/black from the slave flash board goes to the orange/green on the Slavemaster.
  3. Firemanjim

    BF slavemaster

    These should answer your questions. If I remember correctly slave + goes to orange and slave neg goes to green. Hope this helps. http://www.snapshotsniper.com/PDFS/BFoutdoors Slavemaster.pdf http://www.snapshotsniper.com/PDFS/Slavemaster Wire Connections.pdf http://www.snapshotsniper.com/PDFS/Slavemaster Operation Manual.pdf
  4. Firemanjim

    more jazz questions

    What kinda case is that housed in?
  5. Firemanjim

    Wanted

    WWW.DealExtreme.Com
  6. Firemanjim

    Pope & Young #6 ........scored again

    Beautiful Buck...Congratulations
  7. Firemanjim

    What You See, is NOT always what you get!

    UV Brighteners maybe.....There is a commercial wash out there made by Atsko I think that is supposed to kill that.....
  8. Firemanjim

    Missing Members?

    Yea Ron...We didn't even get a "Honorable Mention"...lol
  9. Firemanjim

    Sad news from Yetinme

    So sorry for your loss Mark....Prayers for you and your family.
  10. I have 2 of the white Jazz Video Cameras. Both are hacked and have the lens in them that has the exchanger built into the lens. I would recommend replacing these lens with the Exchanger123 lens we all used. I put batteries in them and both turned on. I did not test the hack so may need rechecked. I found these while moving everything into my new shop. If anyone wants these I will do $25 each + shipping. I will be adding tons of more stuff in the days to come. Email me at JTSWILDLIFECAMERAS@GMAIL.COM
  11. I have a New BugFoot Board FOR SALE. Never been hooked up. Comes with Reed Relay for running a DXG 125 Video Unit. Asking $30 I also have a unopened DXG 125 Camera with battery and charger. $40 $60 + Shipping Gets You Both!! Email me at JTSWILDLIFECAMERAS@GMAIL.COM
  12. Firemanjim

    New build

    Nice to see someone has taken the "Build for Others" niche....I have turned down tons of builds. I will start sending them your way Ralph!! Tons of money to be made!!
  13. I pretty much fell in love with this deer the first time I captured his picture on a trail camera. He is defenately not the biggest buck on the mountain but I really liked the kickers, or TRASH as we call them here in the south, off both of his G2's. I caught pictures of him at least 4 nights a week all season long. Never a picture in the daytime until Thanksgiving morning. I passed up over 40 bucks because I decided I was only going to hunt this buck this year. So the chase began on the opening day of bow season here in TN. The last Saturday of September. I never seen him not once from the tree stand until this morning. But I knew he was still there from the trail camera pictures. I was in the treestand 30 minutes before daylight this morning. Around 8:30 this morning a group of nine does came onto the ridge I was hunting to graze on the acorns. They were there feeding for about 30 minutes. Thanks to Scent Lock they never knew I was on the same planet with them. When all of a sudden they all "Locked Up" and started looking in the same direction. It sounded like a D9 Cat Dozer was coming up the ridge. Well It was "SKYSCRAPER"...He flushed the does like they were a covey of quail. Does broke and ran in every direction. He chased them all over the ridge with his noes up their rear....UNTIL.....at 9:08 AM he stopped in a clearing...Gave me enough time to confirm he was who I thought he was...20 seconds later the Browning X-Bolt chambered in 26 Nosler barked....He never took a step.....
  14. Firemanjim

    Pre Amp with sister boards

    For some reason I cant upload the pictures of the board. My cell # is 931-808-9855 if you want to text me I will send you the pics
  15. Firemanjim

    Pre Amp with sister boards

    Here you go Johnnie. This board is designed to run the array and preamp from the same power source. If you use different power sources I will need to change a few traces. Red is top traces. Green is bottom traces.
  16. Firemanjim

    Pre Amp with sister boards

    you don't actually solder them on. You use a solder paste and then you use a hot air solder wand to bond them. Pretty much impossible to do it with a hand wand. I am getting off at the fire station this morning. I will look around in the shop when I get home and see what I actually have .....
  17. Firemanjim

    Pre Amp with sister boards

    I probably have 200 or so of those blank boards in my shop. Problem is they are all SM stuff. Not TH anymore. When I ran out of TH boards I gradually converted everything to SM. I may still have the Gerber files for the TH boards but I had a computer crash a few months ago and I am sure they are gone. Things are starting to slow down some in the fire station so maybe I will have a chance to redraw the file for you.
  18. Firemanjim

    Auto on camera

    I would connect it to a output instead of a opto. Not sure the opto will trigger the sister board get to close. The sister boards are designed to work with a output but try it and see...may work with a opto. I personally have never tried it.
  19. Firemanjim

    Error Codes..

    I can't read anything on the forum at all.....Every thread I click on says the error code....
  20. Would you sale just the memory sticks and cards? If yes than how much?
  21. Firemanjim

    Question for the "Board builders and Suppliers

    Just for the 'Record" I offered to send you a brand new board FREE!! I am sorry my computer got crashed in a lightning storm. The board is over 3 years old.....Just curious how long do you feel we should "warranty" these boards? Did I mention that I offered to send you a BRAND NEW BOARD FREE!! Glad you got that off your chest!
  22. Firemanjim

    Picaxe 14m Slave Controller

    The problem has to be in the interrupt portion of the code I sent you.....we will play with it some more .....don't give up on this yet...
  23. Firemanjim

    Questions Dxg 567v

    The 224 does not have a color filter on it. It is a ir lense....
  24. Firemanjim

    Questions Dxg 567v

    The bb224 is the lens I have found to be best with the 567 and the 125's. Bases are the same. I get the lenses at www.elecrronics123.com
  25. Firemanjim

    Been a long time coming

    Not sure if you done this or not.....but if you will put a 1M resistor to ground on one side of the resistor and put the other side of the resistor in line to the picaxe it will help "stabalize" the signal to the picaxe....
×