ks_kiwi

yeti S40 fast mod - quick help

4 posts in this topic

Which wires do I cross etc to verify that I did the mod successfully?

I'm set to:

Green = shutter

Red = power

Black = common

White = lens

 

Many thanks

Share this post


Link to post
Share on other sites
 
 

Same as your s600 fast mod:

 

You have 4 wires: Common, Power, Shutter, Lens Sensor

 

Secure the Lens Sensor wire to Common the whole time. This will allow you to operate the camera like you would normally.

 

To see how the fast start would work do this sequence to get things started. Secure the Lens Sensor wire to Common Camera Is OFF, then touch Power to Common. The camera comes on and lens extends. Now cross Common and Power to turn off the camera then QUICKLY disconnect the Lens Sensor wire from Common when the barrel of the Lens is flush with the face of the camera. Camera should be OFF. Now connect the Lens Sensor wire to Common Camera is still OFF. Now touch the Power to Common this will give you a rough idea of how the fast start will work.

 

Good Luck!

Share this post


Link to post
Share on other sites
 
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now