• Announcements
     
     
    • Badgerbuckhunter

      Thank you note   08/24/2017

      I receive this thank you note from Peggy Warden  Mr. Stadler,  I didn’t post this under announcements, but you can if you want.  Thank you very much for sending the card, money and letting the members know about Chris’s death.  The members on Hagshouse are a special group of guys.  I knew that you all have really big hearts from past experiences when I was helping with charity auctions, etc. But I didn’t know what to say when I got a card with a $500.00 check because Chris had been inactive for a good while now.  Thank you all for the money and the kind words that were written about him on the website.  It was a great comfort for our family to read through each post.  It is just amazing that guys, most of whom I have never met in person, hundreds of miles away, reach out to help with prayers and money.  Chris and I were very thankful for being able to have come to know allot of you through e-mail and phone conversations, being part of your website and running the store.  Life without Chris is the hardest thing in life that I have ever had to do, but it sure does make it easier to bear with friends like you.  There has got to be a big meeting place reserved up in heaven where all the Hagshouse guys get together.  God bless you all!  Sincerely, Peggy Warden P.S.  Chris had signed me up with the Hagshouse member name of “Methuselah”.  As some of you may know, Methuselah was the oldest person in the Bible.  Lol!  He did have a sense of humor.
    • Badgerbuckhunter

      Tapatalk   09/02/2017

      Please see posting in "Cabin" I need your help.
     
Sign in to follow this  
ghosthunters

Panasonic Sz7 Video Build

7 posts in this topic

Here is another video build I have been working on in between builds. I am really impressed with the Panasonic video cameras. This is an SZ7 and is a 14mp camera and has 1080p video capabilities, plus has stereo mics. There is room in the 1060 pelican case but everything needs to be in its place. I have a built in baby slave if I use the settings for night stills. I had Ralph specifically program the control board in this build for my specific needs. The build has five 1.5v batteries for the baby slave and double the power for the externals. The build also has a 3D printed snorkel of mine that was specifically designed for and works with SZ02, SZ1, SZ7 and probably works with the SZ9 and SZ5. I have a specific place in mind for this camera this fall. It is working great in testing and ready for the hills.

 

 

 

 

post-9267-1488947947_thumb.jpg

Share this post


Link to post
Share on other sites
 

Very nice Build

Share this post


Link to post
Share on other sites
 
Here is another video build I have been working on in between builds. I am really impressed with the Panasonic video cameras. This is an SZ7 and is a 14mp camera and has 1080p video capabilities, plus has stereo mics. There is room in the 1060 pelican case but everything needs to be in its place. I have a built in baby slave if I use the settings for night stills. I had Ralph specifically program the control board in this build for my specific needs. The build has five 1.5v batteries for the baby slave and double the power for the externals. The build also has a 3D printed snorkel of mine that was specifically designed for and works with SZ02, SZ1, SZ7 and probably works with the SZ9 and SZ5. I have a specific place in mind for this camera this fall. It is working great in testing and ready for the hills.

 

 

 

 

post-9267-1488947947_thumb.jpg

 

I am sorry but for some reason it only posted one picture of the build. Having some issues getting pictures posted up on here.

post-9267-1488976950_thumb.jpg

Share this post


Link to post
Share on other sites
 
Here is another video build I have been working on in between builds. I am really impressed with the Panasonic video cameras. This is an SZ7 and is a 14mp camera and has 1080p video capabilities, plus has stereo mics. There is room in the 1060 pelican case but everything needs to be in its place. I have a built in baby slave if I use the settings for night stills. I had Ralph specifically program the control board in this build for my specific needs. The build has five 1.5v batteries for the baby slave and double the power for the externals. The build also has a 3D printed snorkel of mine that was specifically designed for and works with SZ02, SZ1, SZ7 and probably works with the SZ9 and SZ5. I have a specific place in mind for this camera this fall. It is working great in testing and ready for the hills.

 

 

 

 

post-9267-1488947947_thumb.jpg

 

I am sorry but for some reason it only posted one picture of the build. Having some issues getting pictures posted up on here.

post-9267-1488977000_thumb.jpg

Share this post


Link to post
Share on other sites
 

Nice build Daryl

Share this post


Link to post
Share on other sites
 

Another great looking build Daryl.

Share this post


Link to post
Share on other sites
 

Excellent work!

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this