 The S600 is now faster and quieter, .4 seconds quicker and less noise (hack Added) |
  |
 Jan 2 2007, 10:10 PM
Post
#1
|
|
 Advanced Member  Posts: 726 Joined: 2-September 03 From: SE Wisconsin hunt in West Central Wisconsin Member No.: 150  |
Well, we now finally have a real reason to do a four wire mod on the S600.
I did basically the same thing I did with the S40 http://hagshouse.ipbhost.com/forums/index....c=24139&hl= The mods seem to save .4 seconds and noise is a lot less. I won't get the mods posted tonight but they are a lot easier than the S40 mods and I should be able to post tomorrow. The downsides are the same as the S40 but nothing too difficult to overcome. Next I will try to find the lens feedback and see if I can get the lens to not move at all. Wish me luck! Mark This post has been edited by yetinme: Jan 9 2007, 07:38 PM  YetiCam Game Cameras and Control Boards
Visit Us at www.yeticam.com |
  
|
|
|
Jan 2 2007, 10:40 PM
Post
#2
|
|
 Advanced Member Posts: 5,734 Joined: 24-July 03 Member No.: 74 |
Pretty neat stuff Mark if you can find a way to fool the cam and leave the lens open all the time that would be a great hack. Thanks for all the R & D
|
|
|
|
|
Jan 3 2007, 01:03 AM
Post
#3
|
|
 Advanced Member Posts: 815 Joined: 22-September 04 Member No.: 943 |
Great to hear Mark,
You're always thinking. gyp |
|
|
|
|
Jan 3 2007, 06:20 AM
Post
#4
|
|
 *Kentucky's Best* Posts: 4,172 Joined: 2-November 05 From: Northern Kentucky Member No.: 2,271 |
Thanks Mark! you might be saving the trail cam world now with the P41, P32, D-380, D-370 becoming scarce
Blank buck tags are not badges of yesterday's failure, but rather tickets to a better tomorrow!
>>>------------> |
|
|
|
|
Jan 3 2007, 07:40 AM
Post
#5
|
|
 Advanced Member Posts: 675 Joined: 11-December 05 Member No.: 2,481 |
good job mark; if there's a way to keep than lens from moving, you'll figure it out
|
|
|
|
|
Jan 3 2007, 09:11 AM
Post
#6
|
|
 Advanced Member Posts: 517 Joined: 17-August 04 Member No.: 754 |
Yetiman.... Were not worthy!!
|
|
|
|
|
Jan 3 2007, 09:30 AM
Post
#7
|
|
|
Advanced Member Posts: 726 Joined: 2-September 03 From: SE Wisconsin hunt in West Central Wisconsin Member No.: 150 |
Thanks for all the nice comments but keep in mind this is really a group effort from a lot of members.
All of the board manufactures on this site have been extremely helpful and there are non suppliers that dump a lot of money in to research as well. It is cool to watch the things that can happen with this stuff when there isn't a big fight over who thought of the ideas first. FZNYupr has some additional ideas about how to speed up the process more that we will be trying out tonight and there is also some work going into finding the feedback for the lens and trying to disable it from moving at all. One other camera I would like to try this with is the DSC-W5. It is already close to the speed of a P41 and with Ghoots no SA hack, it might be a reall good camera. Oh yeah, the IR glass is easy to get out too. This camera is probably my favorite camera for speed. Mark This post has been edited by yetinme: Jan 3 2007, 09:31 AM YetiCam Game Cameras and Control Boards
Visit Us at www.yeticam.com |
|
|
|
|
Jan 3 2007, 10:26 AM
Post
#8
|
|
 Advanced Member Posts: 241 Joined: 19-December 04 From: Green Bay, Wis Member No.: 1,321 |
great work Mark
|
|
|
|
|
Jan 3 2007, 10:46 AM
Post
#9
|
|
 Advanced Member Posts: 435 Joined: 7-November 06 From: SOUTH DAKOTA Member No.: 3,622 |
keep us posted on the DSC-W5
I LOVE ANIMALS I THINK
THEY TASTE GREAT!!!!!!!  The greatest pleasure in life is doing what people say you cannot do. |
|
|
|
|
Jan 9 2007, 07:40 PM
Post
#10
|
|
|
Advanced Member Posts: 726 Joined: 2-September 03 From: SE Wisconsin hunt in West Central Wisconsin Member No.: 150 |
Here is the hack for the S600. I haven't created a video showing the difference but there is a real difference. I have some stereo jacks on order that I hope will allow easier use of the cam outside the case.
Mark 
Modification_document_for_the_Sony_DSCS600_Version_2.pdf ( 884.58K )
Number of downloads: 24This post has been edited by yetinme: Sep 11 2007, 05:45 PM YetiCam Game Cameras and Control Boards
Visit Us at www.yeticam.com |
|
|
|
|
Jan 9 2007, 09:12 PM
Post
#11
|
|
|
Advanced Member Posts: 726 Joined: 2-September 03 From: SE Wisconsin hunt in West Central Wisconsin Member No.: 150 |
Just made some quick changes to the document.
Thanks Bat for the Help! Mark YetiCam Game Cameras and Control Boards
Visit Us at www.yeticam.com |
|
|
|
|
Jan 9 2007, 09:19 PM
Post
#12
|
|
 just call me "bat" Posts: 6,334 Joined: 27-September 04 From: Ashburn, Ga. Member No.: 960 |
No problem Mark, great work..
God Bless Our Troops in whatever Branch you Serve in or Have Served. We Thank "You" from the bottom of our Heart.
|
|
|
|
|
Jan 9 2007, 09:20 PM
Post
#13
|
|
 Advanced Member Posts: 3,258 Joined: 11-July 04 From: Vermont Member No.: 601 |
That looks pretty easy mark.. Cool
If I get there I get there, but don't hold your breath!
My Photo stamper programs W/Moon Phase |
|
|
|
|
Jan 9 2007, 09:40 PM
Post
#14
|
|
|
Advanced Member Posts: 517 Joined: 17-August 04 Member No.: 754 |
Very nice
For those of you asking if a Yeti board can be used in a pipe through, here s proof. It makes a Sweeeet unit. You can turn the rapid pic off with a dip switch and you don't lose your lowest time delay. The range and speed is awesome!Cybersniper 
DSC00007__Medium_.JPG ( 82.01K )
Number of downloads: 48 |
|
|
|
|
Jan 10 2007, 05:17 AM
Post
#15
|
|
|
Advanced Member Posts: 3,258 Joined: 11-July 04 From: Vermont Member No.: 601 |
Mark will this interfere with viewing the pictures also?
If I get there I get there, but don't hold your breath!
My Photo stamper programs W/Moon Phase |
|
|
|
|
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
Skin by: SbyD © all rights reserved.
| Lo-Fi Version | Time is now: 29th July 2010 - 09:22 AM |