Neuros remote hack, Different remote than yentime's previous post Options

[busman]

First of all there are two different remote styles for the neuros mpeg4 player. The remotes come apart the same way first peel the button cover off with a exacto knife. One style remote has four screws, the remote I have has six screws and has 28 buttons on the board. The button cover only shows 24 buttons like the other remote. Remove these screws and remove the board. Drill a hloe through the back of the case. Run your four wire servo cable through the back of the case then solder wires to the pads indicated in the pic. and reassemble. Just thought I would pass this on. Good Luck.

11th Pin down on left of chip - White Wire - Common Record Button Wire
11th Pin down on right of chip - Black Wire - Common Power Button Wire
6th Pin down on left of chip - Red Wire - Positive Power Button Wire
5th Pin down on left of chip - Green Wire - Positive Record Button Wire

This post has been edited by busman: Oct 1 2007, 08:06 PM

Attached File(s)

 DSC04752e__Medium_.JPG ( 72.34K ) Number of downloads: 41
 DSC04753__Medium_.JPG ( 58.18K ) Number of downloads: 11
 DSC04754__Small_.JPG ( 75.48K ) Number of downloads: 10