 Jazz Dv-150 And Dxg-567v Wiring Diagrams, I modified the DXG diagram for the Jazz |
  |
 Sep 20 2009, 10:48 PM
Post
#1
|
|
 Advanced Member  Posts: 3,019 Joined: 2-January 08 From: MARYLAND Member No.: 5,460  |
Below is the Jazz Wiring Diagram. I will post the DXG in the following post. The DXG has been looked over by others on here a few times but this one for the Jazz has not. I checked it pretty good but would some of you guys look it over too. Anyone who wants to use, copy or post shortcuts to them are welcome to do so. If you see anything wrong or that would make it better let me know and I will change it.
Jazz DV-150 Wiring Diagram 
JAZZ_FULL_WIRING_DIAGRAM_REV._6.JPG ( 153.31K )
Number of downloads: 71This post has been edited by TCSCOUT: Nov 9 2009, 04:39 PM |
  
|
|
|
Sep 20 2009, 10:49 PM
Post
#2
|
|
|
Advanced Member Posts: 3,019 Joined: 2-January 08 From: MARYLAND Member No.: 5,460 |
DXG-567V Wiring Diagram
DXG_FULL_WIRING_DIAGRAM_REV.5.jpg ( 233.69K )
Number of downloads: 111This post has been edited by TCSCOUT: Oct 20 2009, 06:29 AM |
|
|
|
|
Sep 21 2009, 04:36 AM
Post
#3
|
|
 Advanced Member Posts: 2,756 Joined: 4-August 08 From: Jacksonville, FL Member No.: 5,910 |
Great job. Thanks!
|
|
|
|
|
Sep 21 2009, 06:57 AM
Post
#4
|
|
 Advanced Member Posts: 712 Joined: 13-January 07 From: OHIO Member No.: 4,210 |
Hey Roger those are great. Can you do one for the jazz that has the exchanger wires in it?
|
|
|
|
|
Sep 21 2009, 09:39 AM
Post
#5
|
|
|
Advanced Member Posts: 2,756 Joined: 4-August 08 From: Jacksonville, FL Member No.: 5,910 |
Might want to wait on the exchanger pic, the 5v is out testing now and so far so good. I have it at the lease and will check it this weekend, but the 3 days at the house it worked well. Since there will be 2 IR exchangers it might make it confusing for everyone as they are hooked up differnetly.
The 3 volt is running off the BF board. The 5 volt is running off the array 6v battery, with the switch wire in the same spot. This post has been edited by egbertdavis: Sep 21 2009, 11:04 AM |
|
|
|
|
Sep 21 2009, 10:49 AM
Post
#6
|
|
|
Advanced Member Posts: 3,019 Joined: 2-January 08 From: MARYLAND Member No.: 5,460 |
QUOTE (JRM6868 @ Sep 21 2009, 08:57 AM)  Hey Roger those are great. Can you do one for the jazz that has the exchanger wires in it? QUOTE (egbertdavis @ Sep 21 2009, 11:39 AM) Might want to wait on the exchanger pic, the 5v is out testing now and so far so good. I have it at the lease and will check it this weekend, but the 3 days at the house it worked well. Since their will be 2 IR exchangers it might make it confusing for everyone as they are hooked up differnetly. The 3 volt is running off the BF board. The 5 volt is running off the array 6v battery, with the switch wire in the same spot. I can do that but like Ron says, I would have to make more than one or wait and see which one is going to be the most widely used. If we have more that one type and different ways of connecting them it might cause some confusion. Lets see what Ron and 212 come up with. |
|
|
|
|
Sep 21 2009, 06:14 PM
Post
#7
|
|
 Advanced Member Posts: 430 Joined: 9-August 04 From: Texarkana, Texas Member No.: 726 |
Maybe Im wrong but is the input and output backwards on the kit 98?
 Genesis 27:3 "Take your bow and a quiver full of arrows out into the open country, and hunt some wild game..."
Genesis 9:2,3 "All the wild animals large and small and the birds and fish will be afraid of you. I have placed them in your power. I have given them to you for food..." Genesis 3:21 "And the Lord God made clothing from animal skins for Adam and his wife." |
|
|
|
|
Sep 21 2009, 07:31 PM
Post
#8
|
|
|
Advanced Member Posts: 3,019 Joined: 2-January 08 From: MARYLAND Member No.: 5,460 |
QUOTE (dwstex38 @ Sep 21 2009, 08:14 PM) Maybe Im wrong but is the input and output backwards on the kit 98? Not sure what you mean? The input to the kit 98 is the external Microphone and the output goes to the Mic connections on the board after you remove the Mic. Maybe you see the word "Mic" on the Jazz and DXG Cams as the Microphone when it is the Mic Input to the Jazz. Do I need to change that? Or is it the polarity + and - you are referring to? |
|
|
|
|
Sep 21 2009, 08:02 PM
Post
#9
|
|
 Most Advanced Member Posts: 684 Joined: 1-February 07 From: Wisconsin Member No.: 4,365 |
Sweet deal...Thanks for taking the time it will sure help
Life's short Hunt Hard or is it the other way Life's hard short hunt
|
|
|
|
|
Sep 21 2009, 09:57 PM
Post
#10
|
|
|
Advanced Member Posts: 430 Joined: 9-August 04 From: Texarkana, Texas Member No.: 726 |
Yes that's the way I'm am seeing it backwards.I'm seeing it as if you were hooking up an amplifier.the outputs of the sound device go
to the inputs of the amp and the outputs of the amp go to the speaker because that's the way the electrons flow. But that doesn't mean I'm right that's just the way I understand it. Genesis 27:3 "Take your bow and a quiver full of arrows out into the open country, and hunt some wild game..."
Genesis 9:2,3 "All the wild animals large and small and the birds and fish will be afraid of you. I have placed them in your power. I have given them to you for food..." Genesis 3:21 "And the Lord God made clothing from animal skins for Adam and his wife." |
|
|
|
|
Oct 20 2009, 06:31 AM
Post
#11
|
|
|
Advanced Member Posts: 3,019 Joined: 2-January 08 From: MARYLAND Member No.: 5,460 |
Just adding the Jazz with the 3 volt exchanger to this topic.
JAZZ_FULL_WIRING_DIAGRAM_With_Exchanger_REV.6.JPG ( 171.96K )
Number of downloads: 19Also look at these topics for more information: http://www.hagshouse.com/forums/index.php?showtopic=35670 http://www.hagshouse.com/forums/index.php?...st&id=34446 http://www.hagshouse.com/forums/index.php?...p;id=34489` This post has been edited by TCSCOUT: Nov 9 2009, 04:49 PM |
|
|
|
|
Oct 31 2009, 05:26 PM
Post
#12
|
|
 Advanced Member Posts: 454 Joined: 2-January 07 Member No.: 4,133 |
these are very nice just wondering if someone here can explain why the minus from the jazz microphone is not hooked to the mic ground on the kit 98 i have always done it the other way was i doing it wrong ? thanks .james
|
|
|
|
|
Oct 31 2009, 06:07 PM
Post
#13
|
|
 Advanced Member Posts: 315 Joined: 7-January 09 From: Helena, MT Member No.: 6,966 |
Great job on the diagrams. Thanks.
Field Programmable Time Lapse Controller Boards..
http://timelapsecontroller.com |
|
|
|
|
Oct 31 2009, 07:55 PM
Post
#14
|
|
|
Advanced Member Posts: 3,019 Joined: 2-January 08 From: MARYLAND Member No.: 5,460 |
QUOTE (jpb31 @ Oct 31 2009, 07:26 PM) these are very nice just wondering if someone here can explain why the minus from the jazz microphone is not hooked to the mic ground on the kit 98 i have always done it the other way was i doing it wrong ? thanks .james Because it works better this way and uses less battery power  . I don't know why , Travis (fznYupr) figured it out, at least 3 of us have tried several different setups this way and it uses way less current when off. Travis will have to explain why it works better this way. It was in this Topic.http://www.hagshouse.com/forums/index.php?...c=36834&hl= |
|
|
|
|
Oct 31 2009, 08:13 PM
Post
#15
|
|
|
Advanced Member Posts: 454 Joined: 2-January 07 Member No.: 4,133 |
ahhh i see that makes sense now maybe that explains why i have the ticking sound on a couple of my jazz builds and the 6 volt batterys are not lasting . thanks tcscout for clearing that up for me
|
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
Skin by: SbyD © all rights reserved.
| Lo-Fi Version | Time is now: 29th July 2010 - 09:17 AM |